Support RS485, Modbus, CAN, CANopen, IO control;

The driver encoder is installed at the rear of the motor to achieve closed-loop control and reduce the volume;

The all-in-one machine can operate in torque or positioning mode without the need for input pulses and is controlled by communication commands;

The comprehensive torque return to zero reset mode can choose to eliminate the return to zero sensor on the motion module;

The driver can be directly connected to the liquid level sensor and the special application return to origin sensor;

The driver is equipped with temperature and torque overload protection;

Provincial wiring mode, only 4 wires are needed to connect with the upper computer, including 2 DC24V power supplies and 2 communication wires;

Supports 254 station numbers (00 to 253), with hexadecimal values ranging from 0X00 to XFD;

Parameter settings (subdivision, current, speed, acceleration/deceleration, displacement, torque, etc.);

It can be changed at any time through the upper computer;

Complete execution actions through simple control instructions;

Motion positioning can be achieved through absolute or relative value instructions;

Precision cast aluminum alloy shell, high strength, low temperature rise, corrosion resistance;

Suitable for 20/28/42/57 size two-phase 4-wire stepper motors;